Com-Linx Industrial 4 Port 60 watt PoE Splitter
Introducing Com-Linx industrial 4 Port 60 watt PoE Gigabit switch with Coax splitter for easy connection to our networks.
Main Features PoE:
- 3 IEEE802.3af/at 35W POE ports and 1 Gigabit uplink port
- All ports 10/100/1000Mbps self-adaptive full duplex & IP67 connections
- Total POE budget 50W
- Rugged enclosure & wide working temperature -40°C to 85°C
- Power Device (PD) Detection, PoE port supports PoE automatic detection
- Non-POE device detection, provide data transmission only, will not output power to prevent damage
- Wide voltage input range 36-75Vdc
Main Features Coax
- Data rates up to 2 Gbps
- Maximum PHY rate : 3Gbps
- Max nodes: up to 14 before requiring a repeater
- TX Distance: 250m/800ft
- TR-069 remote management
- Flexible frequency selection
- Strong interference proof capability
- Advanced data link layer agreement
- Industrial voltage input range 18-75Vdc
Specifications Coax
RF Specifications:
Max TX Power - +9dBm
Typical TX Power - +2dBm
Power TX Mode - Auto/Manual
RX Sensitivity - -72dBm
Insertion Loss - < 2dB
TX Distance - 250m/800feet
Application Rate - Bidirectional, up to 2 Gbps
Communication Mode:
Modulation Mode - OFDMA
Sub-carrier Quantity - 512*5
Sub-carrier BW - 195.3125KHz
Carrier Modulation Density - BPSK, QPSK, 8QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 1024QAM
MAC Layer Protocol - TDMA/TDD
Maximum PHY Rate - 3 Gbps
Latency:
Typical - 3ms
Maximum - 5ms
Delay Jitter - 1ms
Port Property:
Hi/Lo Pass Filter - Built-in
RF Port Mode - F-Female, 75 Ohm
RF Port - 1 Output, 1 Input
Power & Consumption:
Power - DC 18-75Vdc
Power Input - 57Vdc/100mA
Power Consumption - <4W
Power Protection:
Isolation - 1500 Vdc isolation
Voltage - under & over voltage protection
Current - over current protection
Power Certification - EN/BS EN 62368-1 certified
Isolation:
Grounding - <5Ω
Anti-Static - Contact-Discharge 6KV, Air-Discharge 8KV
Dimension:
Dimension - 300*100*150mm/12"x4"x6"（L×W×H）
Operating Environment:
Environment - IP68 rated, Waterproof up to 1.5m.
Operating Temperature: -40~+85 °C
Operating Humidity - 5%～95% , No condensation
Store Temperature : -40～+85 °C
Specifications PoE
Ethernet Standards:
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE 802.3af/at
Packet Buffer - 1Mbits
Packet Length - 10Kbytes
MAC Address Table - 8K
Switch Fabric - 10Gbps/non-blocking
Property Backplane bandwidth - 10Gbps
Packet forwarding rate - 14.88Mpps
Connectors - 4 * 10/100/1000BaseT RJ45 auto-MDI/MDI-X, IP67
Environmental:
Operating Temperature: -40°C to 85°C
Storage Temperature: -40°C to 85°C
Relative Humidity: 5% to 95% non-condensing
MTBF > 200,000 hrs.
Power:
Input Power - 36 to 75Vdc
Power Consumption - <6W (PoE In Use: <50W)
Power Input Overload - Automatic Resettable & Reverse Polarity
LED indicators - Power, L/A Link/Activity, SPD Data Rate
Regulatory Approvals:
ISO9001
EN55022:2010+AC: 2011, Class A
EN 61000-3-2: 2006+A1: 2009+A2: 2009
EN 61000-3-3: 2013
EN55032:2017
IEC 61000-4-2: 2008 (ESD)
IEC 61000-4-3: 2010 (RS)
IEC 61000-4-4: 2012 (EFT)
IEC 61000-4-5: 2014 (Surge)
IEC 61000-4-6: 2013 (CS)
IEC 61000-4-8: 2009 (PFMF)